Tags
Automation, Robots, Rapid prototyping, CAD/CAM, Computer-aided design, Computer-aided manufacture, Compurer-aided process planning, Flexible automation, Flexible manufacture, Assembly automation, Hybrid automation, Modeling, Sensing, Learning, Artificial intelligence, Neural nets, Expert systems, Case-based reasoning, Inspection planning 
Patri K. Venuvinod, and Weiyin Ma, 2004, Rapid Prototyping: Laser-based and Other Technologies, Kluwer Academic Publishers (389 pages). View sample only (from Amazon.)
Yuen, C.F., Wong, S.Y., and Venuvinod, P. K., 2002, Development of a Generic Computer-Aided Process Planning Support System, J. Material Processing Technology, 139(1): 394-401. Also presented at Int. Manufacturing Conference in China, Hong Kong, Aug. 2000, Vol. II, pp. 51-52.
Wong, F.S.Y., Chuah, K.B., and Venuvinod, Patri K., 2005, Automated Extraction of Dimensional Inspection Features from Part CAD Models, Int. J. Production Research, Special Issue on Manufacturing Research in China.
Wong, F.S.Y., Chua, K.B., and Venuvinod, P.K., 2006, Automated Inspection Process Planning: Algorithmic Inspection Feature Recognition, and Inspection Case Representation, Robotics and Computer-Integrated Manufacturing, 22(1): 56-68.
Venuvinod, Patri K., 1997, Prediction Augmentation Through Reinforcing Interactions Amongst Modeling, Sensing and Learning,? Working paper, Meeting of the Working Group on „Modeling of Machining Operations‟, STC Cutting, CIRP General Assembly, Tianjin, China, August.
Wu, Paul S., Tam, H.Y., and Venuvinod, P. K., 1996, Hybrid Assembly: A Strategy For Expanding The Role of Advanced Assembly Technology, Computers in Electrical Engineering, 22(2): 109-122.
Frederick Cheng, 1997, "Force Prediction in End Milling Using Artificial Neural Nets Augmented by Acoustic Emission," M. Eng. Thesis produced under the supervision of Patri K. Venuvinod, Department ofManufacturing Engineering and Engineering management, City University of Hong Kong. 
Venuvinod, P. K., 1997, Foreword to the Proceedings of CIRP International Symposium on Advanced Design and Manufacture in the Global Manufacturing Era.
Venuvinod, P.K., 1993, Automated Analysis of 3D Polyhedral Assemblies: Assembly Directions and Sequences, Trans. North Am. Manufacturing Res. Inst. of SME (NAMRI/SME), May, Vol. 21, pp. 399-406. Republished in Journal of Manufacturing Systems, Vol. 12, No. 3, 1993, pp. 246-252
Venuvinod, P.K., and Yuen, C.F., 1994, Efficient Automated Geometric Feature Recognition Through Feature Coding, Annals of CIRP, Vol. 43, No. 1, pp. 413-416.
Venuvinod, P.K., and Djordjevich, A., 1996, Towards Active Chip Control, Annals of the CIRP, 45(1): 83-86.
Wu, Paul, S., Tam, H.Y., and Venuvinod, P.K., 1994, "Intelligent Assembly:Teaching and Research Strategies at the City Polytechnic of Hong Kong," Int. Symposium on Robotics and Manufacturing (ISRAM), Maui, USA, 14-18 August. 
Wong, S.Y., and Venuvinod, P.K., 1991, "Developments in Design for Assembly," 5th Int. Manufacturing Conference in China (IMCC), April.
Venuvinod, P. K., 1991, "Towards the Flexible Manufacturing of Food," 7th Int. Conference Computer Aided Production Engineering (ICAPE), Tennessee Technological University, Cookeville, March, 391-399.
Venuvinod, P., K., and Cheung, E.C., 1989, "New Development in Manufacturing Engineering Education at the City Polytechnic of Hong Kong," 6th Annual Conference Hong Kong Educational Research Association, Hong Kong, November 11 12.
Venuvinod, P.K., 1988, How Hong Kong Industries Can Reduce Their Assembly Costs, Science and Business Link up, Hong Kong, May, 1993..
Venuvinod, P.K., 1987, "Computer Aided Approaches to Product Design for Ease of Assembly," Int. Conference Industrial Automation, Autotech '87, Hong Kong, October.
Leung, P.W., Mo, P.T., and Venuvinod, P.K., 1985, "Flexible Manufacturing Cell in an Educational Environment," 2nd Int. Metal Cutting Conference, Wuhan, China.
Venuvinod, P.K., and Leung, P.W., 1985, "Role of Flexible Manufacturing Cell in the Education of the Modern Manufacturing Engineer," Int. Conference Automation in Manufacturing, Singapore, session 1, 56 68.
Venuvinod, P. K., 1995, Recent Developments in Manufacturing Engineering Education in Hong Kong," Manufacturing Education for the 21st Century, Vol. II (Compendium of International Models for Manufacturing Education), Society of Manufacturing Engineers, ISBN 0-87263-464-7, pp. 129-152.
Venuvinod, P.K., 1986, "Changing Patterns of Manufacturing Engineering Education Under the Impact of CIM", Hong Kong Computer Conf., Book 5, pp. XIV.3.1 - XIV.3.11, published further as "Impact of Computer Integrated Manufacture on Engineering Education, Hong Kong Computer Journal, Vol. 2, No. 6, pp. 25 35, June 1986.
Yuen, C.F., and Venuvinod, P.K., 1999, Geometric Feature Recognition: Coping with the Complexity and Infinite Variety of Features, Int. J. Computer Integrated Manufacture, 12(5): 439-452.
Djordjevich, A. and Venuvinod, Patri K., 2002, Streamlining the Controls, Electronics and Automation Subjects in Manufacturing Engineering Programs,� Proc. 1st Int. Manufacturing Education Conf., University of Twente, Twente, Netherlands, April 3-5.
Z-Q. Liu, and Patri K. Venuvinod, 2001, Towards Autonomous Compilation of Turning Force Databases: Utilization of On-machine Measurement of Machined Parts, Machining Science and Technology: An International Journal, iVol. 5, No. 2, pp. 171-193. 
CIDAM: Centre for Intelligent Design, Automation & Manufacturing, City University of Hong Kong, Initiated by MEEM while Patri Venuvinod was its Head, A presentation by CIDAM Director, Prof. S.K. Tso, in 2000.
M.K. Cheng and Patri K. Venuvinod, 2001, Development of Autonomous Machining Database at the Machine Level (Part 1) - Cutting Force Data Acquisition through Motor Current Sensing, Int. Conf. Prodn Res. (ICPR-16), Prague, Czech Republic, August.
Yuen, C.F., and Venuvinod, P.K., 1999, Geometric Feature Recognition: Coping with the Complexity and Infinite Variety of Features, Int. J. Computer Integrated Manufacture, 12(5): 439-452.
Venuvinod, P. K., 1999, "Intelligent Production Machines: Benefiting from Synergy amongst Modelling, Sensing and Learning," Intelligent Machines: Myths and Realities, Edited by Clarence de Silva, CRC Press LLC., Chapter 7, pp. 207-244.
Liu, X., Zhang, W.J., and Venuvinod, P.K., 1997, Intelligent Manufacturing Systems in Global Manufacturing Paradigm: A Critical Review and New Research Issues? CIRP Symposium on Advanced Design and Manufacture in the Global Manufacturing Era, Hong Kong, 406-416, August.
"Cover Story: CAD/CAM in Laboraory", 1985, Report on the interview of Dr. K.V. Patri on the occasion of the establishment of Elite .CAD/CAM Laboratory at the Department of Production and Industrial Engineering (PIE), Hong Kong Polytechnic, Electronic Bulletin, July, pp 27-29, Hong Kong Productivity Council (HKPC).
Lau, W.S., and Venuvinod,P.K.,"The Development and Utilization of NC Machines in EastAsia", 9th All India Machine Tool Design and Research Conference, Kanpur, India.
Book review by Patri, K.V., 1993, One Piece Flow by Keinichi Sekine, ProductivityPress, Cambridge, Massachusetts, 286 pages, $75.00, Interfaces, July-August, pp131-132. 
Lau, W.S., and Venuvinod, P.K., 1980, “The Development and Utilisation of NC Machine Tools in East Asia," 9th All India Machine Tool Design and Research Conference, Kanpur, India, 

AUTOMATION SYSTEMS
 ABOUT   DOWNLOADS     BUY     BLOG     VIDEOS     PODCAST     CONTACT

Promoting T, I & E for nation-building, firm-growth and startup success
[Valid RSS]
My title