Tags
Technology, Innovation, Entrepreneurship, Culture, Creativity, Education, Postgraduate education, Startup, Globalization, Competition

Venuvinod, P. K., 2011, Introducing Venuvinod's recent trilogy titled Technology, Innovation and Entrepreneurship, Part I: My World, My Nation, Part II: My Firm, Part III: My Startup. 
Patri K. Venuvinod, 2007, Entrepreneurship as a Career, KAB Consultants Magazine, Hyderabad.
Patri K. Venuvinod, 2007, The Emerging Weightless World, KAB Consultants Magazine, Hyderabad.
Patri K. Venuvinod, 2011, Technology, Innovation and Entrepreneurship, Part I: My World, My Nation, eBook as well as print-on-demand editions are available from numerous book retailers and distributors including Amazon, Barnes & Nobles, Smashwords, and Lulu. Click on the Doc buttonfor a  15% sample. 
Patri K. Venuvinod, 2011, Technology, Innovation and Entrepreneurship, Part II: My Firm, eBook as well as print-on-demand editions are available from numerous book retailers and distributors including Amazon, Barnes & Nobles, Smashwords, and Lulu. Click on the Doc button for a 15% sample. 
Patri K. Venuvinod, 2011, Technology, Innovation and Entrepreneurship, Part III: My Startup, eBook as well as print-on-demand editions are available from numerous book retailers and distributors including Amazon, Barnes & Nobles, Smashwords, and Lulu. Click on the Doc buttonfor a 15% sample.  
Patri K. Venuvinod, 2004, "Postgraduation Education," A presentation under the auspices of iodevuni.org, 
Venuvinod, P.K., and Sun, Hongyi, 2002, "Technological Product Innovation: An Educational Perspective from Hong Kong," 9th Asia-Pacific Conference of Engineering Management Educators (ACEME 2002), Brisbane, Australia, 7-8 October.
Djordjevich, A. and Venuvinod, Patri K., 2003, Integrating Mechatronics in Manufacturing and Related Engineering Curricula, Special Issue on Mechatronics, Int. J. Engineering Education , 19(4): 544-549.
Djordjevich, A. and Venuvinod, Patri K., 2002, “Streamlining the Controls, Electronics and Automation Subjects in Manufacturing Engineering Programs,� Proc. 1st Int. Manufacturing Education Conf., University of Twente, Twente, Netherlands, April 3-5.
Patri K. Venuvinod, 2003, "Technovation and Mechatronics," Keynote Address, Technology Conference, Mahatma Gandhi Institute of Technology, Hyderabad.
Patri K. Venuvinod, 2003, "eLearning", A presentation under the ausipices of iodevuni.org,, Hyderabad, (The presentation had almost culminated in the establishment of an elLearning center in Hyderabad. SThe goal was to make Hyderabad a global hub for eLearning. Sadly, that didn't happen).
Venuvinod, P.K., and Sun, H., 2000, “Corporate Cultures in the Eras of Productivity, Quality, and Innovation: A Perspective from Hong Kong,� Asian Academy Seminar, Hyderabad, December.
P.K. Venuvinod and Hongyi Sun, 2001, "Teaching Management of Technological Innopvation to Engineers:A Regional Perspective from Hong Kong".
Patri K. Venuvinod, 2001, "Strategy for the Development of IODevUni (iodevuni : A Knowledge Portal)," IODevUni Meeting, Hyderabad.
K. Venuvinod Patri, V.M. Rao Tummala, and S.R.T Kumara, 2001, "International Organization for Developing Universities (iodevuni.org)", The presentation by Venuvinod to a group of senior academics in Hyderabad, which culminated in the formation of iodevuni)
BEME: Bachelor of Engineering in Manufacturing Engineering, A program offered by by the Department of Manufacturing Engineering and Engineering Managment (MEEM), Presented by Patri Venuvinod in 2000. 
CIDAM: Centre for Intelligent Design, Automation & Manufacturing, City University of Hong Kong, Initiated by MEEM while Patri Venuvinod was its Head, A presentation by CIDAM Director, Prof. S.K. Tso, in 2000.   
Patri K. Venuvinod, 2000, A presentation outlining the development of the Department of Manufacturing Engineering (MEEM), Prepared for Joint University Programmes Admissions System (JUPAS), Hong Kong. 
Peter Tse, B. Eng. (Hons) in Mechatronic Engineering in the Department of Manufacturing Engineering and Engineering Management, 2000, City University of Hong Kong, 
Venuvinod, P. K., and P. Narasimha Reddy, 2002, "Future Trends in Mechatronic Engineering".
Venuvinod, P.K., 2001,  Information Technology (IT) Project Competition: 2001 conducted by Andhra Pradesh Chapter of International Organization for Developing Universities (iodevuni).
Wong, W-K., Cheung, H-M, and Venuvinod, Patri K., 2005, Assessing the Growth Potential of High-Technology Start-Ups: An Exploratory Study from Hong Kong, Journal of Small Business and Entrepreneurship 18(4): 453–470.  
Venuvinod, Patri K. and Narasimha Reddy, P., 2002, Trends in Mechatronic Engineering and Education, Seminar on Mechatronic System Engineering, M.J. College of Engineering, Hyderabad, India, February 20. 
Lee, Y.H., Tummala, V.R., Yam, C.M., and Venuvinod, P.K., 1997, "Future Directions of Globalization of Hong Kong Manufacturing Industries under the Reform and Opening up of China," Int. Conference on Architecting the Global Village: Perspectives, Problems and Prospects, Hyderabad, India, January.
Venuvinod. P.K., and Ostafiev, V.A., 1997, "Successes, False Starts, and Promises in Manufacturing Engineering: Contrasting Perspectives from Hong Kong and Ukraine," 17th All India Manufacturing Technology, Design and Research Conference, Warangal, January.
Patri K. Venuvinod, 1997, "A Matter of Disciplines", and policy paper delineating the disciplines of Industrial Engineering, Manufacturing Engineering, Mechatronic Engineering, and Engineering Management.
Venuvinod, P. K., 1997, Foreword to the Proceedings of CIRP International Symposium on Advanced Design and Manufacture in the Global Manufacturing Era. 
Venuvinod, P. K., 1997, Machining Research Group, A paper outlining the agenda of the group.
"Economics first, always," Rasheeda Bhagat quotes Dr. Venuvinod Patri, July 3, 1998, Hindu, India.
"Eventually it will be a Hong Kong takeover of China," Rasheeda Bhagat interviews Dr. K. Venuvinod Patri, 1998, Business Line, India.
"Sentiment rare in Hong Kong, business comes first," Rasheeda Bhagat interviews Dr. K. Venuvinod Patri, JHead, Department of Manufacturing Engineering and Engineering Management, City University of Hong Kong, July 13, 1998, article in Business Line, India.
Venuvinod, P.K., 1986, "Changing Patterns of Manufacturing Engineering Education Under the Impact of CIM", Hong Kong Computer Conf., Book 5, pp. XIV.3.1 - XIV.3.11, published further as "Impact of Computer Integrated Manufacture on Engineering Education, Hong Kong Computer Journal, Vol. 2, No. 6, pp. 25 35, June 1986.
Venuvinod, P. K., 1989, On the Need for Professional Design Management, Annual Issue of the Institute of Industrial Engineers (Hong Kong), pp. 35-38.
Chin, K.S., P., K.V., Pun, K.F., Yeung, W.H., Poon, L.T., and Poon, K.K., 1996, Starting the Journey: Team Based QI in a University Laboratory, The TQM Magazine, Vol. 8, No. 2, pp. 19-24.
Venuvinod, P.K., and Rao, K.P., 1993, A Mechatronic Engineering Curriculum for Professional Education, Int. J. Engineering Education, Vol. 9, No. 5., 8 pages. 
Sun, H., Yam, R.C.M., and Venuvinod, P.K., April 1999, Education in Engineering Management, J. Engineering Education, 181-184.
Lee, Y.H., ., and Tummala, V.M.R., Yam, R.C.M, and Patri K. Venuvinod, 1998, “Future Development Directions for the Global Competitiveness of Hong Kong Manufacturing Industries,� Industrial Engineering and Management Symposium (IEM ’98): Transformational Strategy Towards the 21st Century, 20-21 November, Hong Kong, Section B, 104-116. 
Liu, X., Zhang, W.J., and Venuvinod, P.K., 1997, “Intelligent Manufacturing Systems in Global Manufacturing Paradigm: A Critical Review and New Research Issues,� CIRP Symposium on Advanced Design and Manufacture in the Global Manufacturing Era, Hong Kong, 406-416, August.
Ostafiev, V.A., and Venuvinod, P., K., 1997, “Some Transferable Technology from Ukraine Industry,� Asian Industrial Technology Congress, Hong Kong, 50-54. 
Ostafiev, V.A., and Venuvinod, P.K., 1996, "A Comparative Analysis of Manufacturing Engineering Education in the former USSR and Hong Kong," Int. Conference Manufacturing Education, (SME), San Diego, March.
Venuvinod, Patri K., 1997, “Literature Database for Modellers of Machining Operations: Progress Report,� Working paper, Meeting of the Working Group on ‘Modeling of Machining Operations’, STC Cutting, CIRP General Assembly, Tianjin, August.
Venuvinod, P.K., and Yam, R., 1994, "Development of the Master Degree Engineering Management Course in Hong Kong," Int. Conference on Engineering Management, Institution of Engineers, Melbourne, Australia, 10-12 April, 291-294.
Venuvinod, P.K., Chan, Lawrence W., Leung, Dennis N.K., and Rao, K.P., 1993, Development of the First Mechatronic Engineering Course in the Far East, Mechatronics, 3(5): 537-541.
Wong, S.Y., and Venuvinod, P.K., 1991, "Developments in Design for Assembly," 5th Int. Manufacturing Conference in China (IMCC), April.
Venuvinod, P. K., 1991, "Towards the Flexible Manufacturing of Food," 7th Int. Conference Computer Aided Production Engineering (ICAPE), Tennessee Technological University, Cookeville, March, 391-399.
Venuvinod, P., K., and Cheung, E.C., 1989, "New Development in Manufacturing Engineering Education at the City Polytechnic of Hong Kong," 6th Annual Conference Hong Kong Educational Research Association, Hong Kong, November 11 12.
Venuvinod, P.K., 1988, How Hong Kong Industries Can Reduce Their Assembly Costs, Science and Business Link up, May.
Leung, P.W., Mo, P.T., and Venuvinod, P.K., 1985, "Flexible Manufacturing Cell in an Educational Environment," 2nd Int. Metal Cutting Conference, Wuhan, China.
Venuvinod, P.K., and Leung, P.W., 1985, "Role of Flexible Manufacturing Cell in the Education of the Modern Manufacturing Engineer," Int. Conference Automation in Manufacturing, Singapore, session 1, 56 68.
Venuvinod, P. K., 1995, “Recent Developments in Manufacturing Engineering Education in Hong Kong," Manufacturing Education for the 21st Century, Vol. II (Compendium of International Models for Manufacturing Education), Society of Manufacturing Engineers, ISBN 0-87263-464-7, pp. 129-152.
Venuvinod, P.K., 2000, Revision of MEEM UG Curricula, Some thoughts.
"Cover Story: CAD/CAM in Laboraory", 1985, Report on the interview of Dr. K.V. Patri on the occasion of the establishment of Elite .CAD/CAM Laboratory at the Department of Production and Industrial Engineering (PIE), Hong Kong Polytechnic, Electronic Bulletin, July, pp 27-29, Hong Kong Productivity Council (HKPC).
Deepak Patri and Patri K. Venuvinod, 2011, "Fortress Mentality in Education: The Need for Technological Windows," A presentation for audiences in Hyderabad, December.  
EDUCATION AND COMMUNITY
 ABOUT   DOWNLOADS     BUY     BLOG     VIDEOS     PODCAST     CONTACT

Promoting T, I & E for nation-building, firm-growth and startup success
[Valid RSS]
My title