Tags
Machining science, Theory of metal cutting, Machine tool design, Rotary tools, Oblique cutting, Resricted contact, Vee cutting, Cutting forces, Cutting temperatures, Tool wear, Tool life, Taylor constant, Machining databases, Artificial intelligence, Neural nets, Lower boundary of shear zone, Chip curl, Error compensation
Venuvinod, Patri K., and Cheng, M.K., 2004, Comparative Assessment of the Force Prediction Abilities of Some Single Edge Orthogonal Cutting Models Over Diverse Data, Int. J. Machining Science and Technology, 8(1): 53-84.
Kharkevich, A.G. and Venuvinod, P. K., 2002, Extension of Basic Geometric Analysis of 3-D Chip Forms In Metal Cutting to Chips with Obstacle-induced Deformation, Int. J. of Machine Tools and Manufacture, 42: 201-213.
Z-Q. Liu, and Patri K. Venuvinod, 2001, Towards Autonomous Compilation of Turning Force Databases: Utilization of On-machine Measurement of Machined Parts, Machining Science and Technology: An International Journal, iVol. 5, No. 2, pp. 171-193. 
M.K. Cheng and Patri K. Venuvinod, 2001, Development of Autonomous Machining Database at the Machine Level (Part 1) - Cutting Force Data Acquisition through Motor Current Sensing, Int. Conf. Prodn Res. (ICPR-16), Prague, Czech Republic, August.
Li,X., Djordjevich. A., and Venuvinod, P.K., Predictiing Machined Errors Using Hybrid Learning, 2001, Int. J. Advanced Manufacturing Technology, 18(12): 863-872. 
Li X., Djordjevich, A., and Venuvinod, P. K., 2000, Current Sensor-Based Feed Cutting Force Intelligent Estimation and Tool Wear Condition Monitoring,, IEEE Transactions on Industrial Electronics, 47(3): 697-702.
Li, X., Venuvinod, P. K,, and Chen, M.K., 2000, Feed-Cutting Force Estimation of Motor Current Estimation with Hybrid Learning, Int. J. Advanced Manufacturing Technology, 16(12): 859-862.
Kharkevich, A.G. (1999 October), Basic Geometric Analysis of 3-DChip Curl for Chip Control in Machining, PD thesis, City University of Hong Kong (Supervisor: Patri K. Venuvinod).   
Li, X., and Venuvinod, P.K., 2000, Wavelet Packet Transforms of Acoustic Emission Signals for Tool Wear Monitoring, Int. J. Manufacturing Science and Technology, 5(2): 171-193. 
Liu, Z-Q, and Venuvinod, P.K., 1999, Error Compensation in CNC Turning Solely from Dimensional Measurements of Previously Machined Parts, Annals of the CIRP, 48(Part 1): 429-432.
Venuvinod, P. K., 1999, "Intelligent Production Machines: Benefiting from Synergy amongst Modelling, Sensing and Learning," Intelligent Machines: Myths and Realities, Edited by Clarence de Silva, CRC Press LLC., Chapter 7, pp. 207-244.
Venuvinod, P.K., May 19 1998, “Sensor-based Modelling of Machining Operations,� Proc. 1st CIRP International Workshop on Modeling of Machining Operations, Atlanta, GA, USA., 397-406.
Lo, H.W., Kaldor, S., and Venuvinod, P. K., 1998, A Broad-Brush Approach to the Selection of General Purpose Cutting Tool Geometry for Maximum Tool Life, Int. J. Machine Tools and Manufacture, 38(1-2): 1-14.
van Luttervelt, C.A., Childs, T.H.C., Jawahir, I.S., Klocke, F., and Venuvinod, P.K., 1998, Modeling of Machining Operations, Keynote paper, Annals of the CIRP, Part 2, 587-626. This is the report from a working group set up by CIRP to deliberate on the past, present and future of modeling of machining operations. Patri K. Venuvinos was acted as the secretary to the group. 
Liu, Z-Q, Venuvinod, P. K., and Ostafiev, V.A., 1998, On-machine Measurement of Workpieces with the Cutting Tool, Int. J. Integrated Manufacturing Systems, 9(3): 168-172.
Kharkevich, A., and Venuvinod, P.K., 1999, Basic Geometric Analysis of 3D Chip Forms in Metal Cutting, Part 2: Implications, Int. J. Machine Tools and Manufacture, 39: 965-983.
Kharkevich, A., and Venuvinod, P.K., 1999, Basic Geometric Analysis of 3D Chip Forms in Metal Cutting, Part 1 : Determining up-Curl and Side-Curl Radii,  Int. J. Machine Tools and Manufacture, 39: 751-769.
Venuvinod, Patri K., and Kharkevich, A., 1999, “Modeling the Geometric Relationship Between 2_D and 3_D Chip Curl in Machining,� 2nd CIRP Int. Workshop on Modeling Of Machining Operations, Nantes, France, January 25-26. 
Ostafiev, V.A., and Venuvinod, P. K., 1997, “A New Electromagnetic Contact Sensing Technique for Enhancing Machining Accuracy,� Manufacturing Science and Technology, MED-Vol. 6-1, ASME, 113-119.
Kaldor, S., and Venuvinod, P.K., 1997, Macro-level Optimization of Cutting Tool Geometry, Transactions of ASME, J. Manufacturing Science and Engineering, 119(1): 1-9.
Ostafiev, V.A., and Venuvinod, P., K., 1997, “Some Transferable Technology from Ukraine Industry,� Asian Industrial Technology Congress, Hong Kong, 50-54. 
Venuvinod, Patri K., 1997, Prediction Augmentation Through Reinforcing Interactions Amongst Modeling, Sensing and Learning,� Working paper, Meeting of the Working Group on „Modeling of Machining Operations‟, STC Cutting, CIRP General Assembly, Tianjin, August.
Venuvinod, Patri K., 1997, “Literature Database for Modellers of Machining Operations: Progress Report,� Working paper, Meeting of the Working Group on ‘Modeling of Machining Operations’, STC Cutting, CIRP General Assembly, Tianjin, August.
Frederick Cheng, 1997, "Force Prediction in End Milling Using Artificial Neural Nets Augmented by Acoustic Emission ," M. Eng. Thesis produced under the supervision po Patri K. Venuvinod, Department ofManufacturing Engineering and Engineering management, City University of Hong Kong. 
Venuvinod, P. K., 1997, Machining Research Group, A paper outlining the agenda of the group.
Venuvinod, P.K., and Djordjevich, A., 1996, Towards Active Chip Control, Annals of the CIRP, 45(1): 83-86. 
Venuvinod, P., K., and Jin, W.L., 1996, Three Dimensional Cutting Force Analysis Based on the Lower Boundary of Shear Zone, Part I : Single Edge Oblique Cutting, Int. J. Machine Tools & Manufacture, Vol. 36, No. 3, pp. 307-323.
 Venuvinod, P. K., 1996, Three Dimensional Cutting Force Analysis Based on the Lower Boundary of Shear Zone, Part II : Two-Edged Oblique Cutting, Int. J. Machine Tools and Manufacture, 36(3): 325-338.
Jin, W., and Venuvinod, P.K. 1995, Interaction Elimination for Multi-Component Strain-Gauge Dynamometers, Sensors and Actuators A: Physical, Elsevier, Vol. 50, pp. 1-6.
Armarego, E.J.A., Jawahir, I.S., Ostafiev, V.A., and Venuvinod, Patri K., 1996, “Modeling of Machining Operations,� Working Paper, Meeting of the Working Group on ‘Modeling of Machining Operations’, STC Cutting, CIRP, Paris, January. 
Lo, H.W., Kaldor, S., and Venuvinod, P. K., 1995, “Tool Life Maximization in Cutting with Two-edged Tools: The Importance of Cooling Factor," Int. Conference Manufacturing in China (IMCC), Harbin. 
Ostafiev, V.A., and Venuvinod, P. K., 1995, “Controlling the Manufacturing Process,� 6th Fundamental Research Conf., World Peace Institute of Technology, Seoul, 120-124.
Venuvinod, P.K., and Jin, W.L., 1993, Prediction of Forces in Oblique Cutting, ME Research Bulletin, City Polytechnic of Hong Kong, Vol. 1, No. 1, pp. 107-124.  
Jin W.L., Zhang, Y., and Venuvinod, P.K., 1993, "On Strain Gauge Type Cutting Dynamometers," 6th Int. Manufacturing Conference with China (IMCC), Hong Kong, Vol. 2, 141-147.
Venuvinod, P.K., Jin, W.L., and Lee, C.M., 1993, "An Analysis of Forces in Oblique Cutting Based on the Lower Boundary of the Primary Deformation Zone," 6th Int. Manufacturing Conference with China (IMCC), Hong Kong, Vol. 2, 103-108.
Narasimha Reddy, P., and Venuvinod, P.K., 1978, "Investigations on Cutting with Rotary Oscillating Tools--A New Cutting Process," 8th All India Machine Tool Design and Research Conference, Bombay. 
Venuvinod, P. K., 1980, “Cutting Forces and Temperatures in Oblique Cutting,� in Chinese, Industry Equipment, November, pp. 136-140.
Venuvinod, P. K., and Lau, W.S., 1980, "New Analysis on the Mechanics, Temperature, Tool Life and Work Hardening in Oblique Machining", in Chinese, J. South China Inst. Tech., Guangzhou, Vol. 8, No. 1, pp. 1-31. (Also presented at the Technical Conference at the 27th anniversary of South China Institute of Technology, PRC, on 17 November, 1979.)
Prasada Rao, T.H.V., Jeebala Rao, D., and Venuvinod, P.K., 1977, "A Study of Dynamic Behavior of Machine Tool Spindle Systems," Int. Conference Production Eng., New Delhi, iii-134 to iii-141
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1983, The Role of Discrete Contact at the Flank Wear Land in Determining Cutting Tool Temperature in Orthogonal Cutting, Int. J. Mach. Tool Des. Res., Vol. 23, No. 4, pp. 245 261.
Venuvinod, P.K., and Lau, W.S., 1986, Estimation of Rake Temperatures in Free Oblique Cutting, Int. J. Mach. Tool Des. Res., Vol. 26, No. 1, pp. 1 14.
Rubenstein, C., Lau, W.S., and Venuvinod, P.K., 1985, Flow of Workpiece Material in the Vicinity of the Cutting Edge, Int. J. Mach. Tool Des. Res., Vol.. 25, No. 1, pp. 91 97.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1985, An Analysis of Symmetrical V Cutting, Annals CIRP, Vol. 34, No. 1, pp. 105 108.
Venuvinod, P.K., and Rubenstein, C., 1983, The Principle of Equivalent Obliquity and its Application to Rotary Cutting, Annals CIRP, Vol. 32, No. 1, pp. 53-58.
Venuvinod, P.K., Lau, W.S., and Narasimha Reddy, P., 1981, Some Investigations into Machining with Driven Rotary Tools, Trans. ASME, J. Eng. for Industry, Vol. 103, No. 4, pp. 469-477
Lau, W.S., Venuvinod, P.K., and Rubenstein, C., 1980, The Relation between Tool Geometry and the Taylor Tool Life Constant, Int. J. Mach. Tool Des. Res., Vol. 20, pp. 29-44.
Murthy, R.L., and Venuvinod, P.K., 1972, Errors of Axial Dimensions of Workpieces held in Collets and Machined on Capstan Lathes, Machine Building Industry, India.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1990, Tool Life in Oblique Cutting as a Function of Computed Flank Temperature, Transactions of ASME, J. Engineering for Industry, 112: 307 312.
K.U. Rao and P.K. Venuvinod, 1989, "An Investigation into the Optimum Geometry of Extra Long Series Drills," 4th Int. Metal Cutting Conference, Non Conventional Machining and Their Automation (IMCC), Beijing, C263-273.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1987, "Analysis of Tool Life in Oblique Cutting Using Computed Values of Flank Contact Temperatures," 3rd Int. Metal Cutting Conference, Non Conventional Machining and Their Automation, Nanjing, China, Vol. I, Paper No. 1 in session on Cutting, May
Rubenstein, C., Venuvinod, P.K., and Lau, W.S., 1986, Analysis of Oblique Cutting with Controlled Contact Tools, Annals of the CIRP, 35(1): 51 54.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1984, "Analysis of the Life of Controlled Contact Tools via Flank Temperature Estimation, Annals of the CIRP, 33(1): 55 60.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1984, "The Estimation of the Dependence of Tool Life on Rake Angle Using Computed Flank Temperatures," 5th Int. Conference Production Engineering, Tokyo, 191 196.
Venuvinod, P.K., and Lau, W.S., 1983, On the Formation of a Fluid Film at the Chip Tool Interface in Rotary Machining, Annals of the CIRP, 32(1): 59-64.
Venuvinod, P.K., 1981, "On the Formation of a Unique Type of Continuous Chip Resembling Transient Chips," 1st Int. Metal Cutting Conference (IMCC), Guangzhou, 14 17 March, pp. 177-199.
Sastry, V.V.S., Sitharama Rao, T.L., and Venuvinod, P.K., 1981, "Steady State Temperatures in Obliquely Moving Heat Sources," 6th National Heat and Mass Transfer Conference, Indian Institute of Technology, Madras, E-39 to E-43.
Venuvinod, P.K., and Reddy, P.N., 1981, "Some Studies on Cutting with Self Propelled Rotary Tools," paper no. 81-WA/Prod-16, Winter Annual Meeting of ASME, Washington, Nov. 15 20, pp. 1-11.
Lau, W.S., and Venuvinod, P.K., 1979, Some Experimental Observations on the Flank Wear of High Speed Steel Cutting Tools, Hong Kong Engineer, Hong Kong Institution of Engineers.
Venuvinod, P.K., Lau, Waishing, and Barrow, G., 1978, "On a New Model of Oblique Cutting". Trans. ASME, J. Eng. Ind., Vol. 100, pp. 287 292. Also presented as paper no. 77-WA/Prod-6 at ASME Winter Annual Meeting, Houston, 1977.  
Venuvinod, P.K., and Lau, W.S., 1977, On the Estimation of Chip Flow Angle in Oblique Cutting, Microtecnic, , Switzerland, No.2, pp 32-35. 
Venuvinod, P.K., and Narasimha Reddy, P., 1973, "Potentialities of Rotary Cutting Tools," 6th All India Machine Tool Deign and Research Conference, Bangalore.
Venuvinod, P.K., and Barrow, G., 1971, "Recent Progress in Machining with Rotary Tools," 3rd All India Mach. Tool Design and Research Conference, Roorkee.
Murty, K.L.N., Ganguly, D., and Venuvinod, P.K., 1976, "Development of Deep Hole Twist Drill," 7th All India Machine Tool Design and Research Conference, Coimbatore, 89-96.
Venuvinod, P.K., and Nayar, Vijayan E., 1975, "On the Estimation of Electric Resistance of Chip Formation Zone in Metal Cutting," Winter Annual Meeting of ASME, Houston, Paper No. 75-WA/Prod-20.
Bhaktavachalam, B., and Venuvinod, P.K., 1973, "Side Curl of ChipsIts Importance and Prediction in Metal Cutting," 6th All India Mach. Tool Design and Research Conference, Bangalore
Venuvinod, P.K., and Narasimha Reddy, P., 1977, "New Discoveries Widen the Scope of Rotary Machining," 8th All India Machine Tool Design and Research Conference, New Delhi.
Venuvinod, P.K., and Nayak, K.M., 1970, An Analysis of Machine Tool Speed Boxes with Minimum Number of Gears, J. Institution of Engineers, India, 50: 221-226.
Murthy, R.L., and Venuvinod, P.K., 1969, “Centers of Rotation as an Aid to the Analysis of the Rigidity of Machine Tools," 3rd All India Machine Tool Design and Research. Conference, Bombay.
Venuvinod, P.K., and Somasundaram, S., 1967, "Oblique Cutting and Application to Rotary Cutting," 1st All India Mach. Tool Des. Res. Conf., Jadavpur, Vol. 2.
Venuvinod, P.K., and Somasundaram, S., 1966, Rotary Tools, Machine Building Industry, India.
Venuvinod, P.K., 1965, An Investigation to Explain and Evaluate the Performance of a Rotary Cutting Tool, M.Tech. dissertation, Indian Institute of Technology, Bombay.
Venuvinod, P.K., 1971, Analysis of Rotary Cutting Tools, Ph.D. thesis, University of Manchester Institute of Science and Technology.
T.A. Janardhan Reddy and Dr. P.K. Venuvinod, Optimisation of Tool Setting in Machining with Type II Rotary Tools, 1978, 1.914, Annual Paper Meeting, December 20, Hyderabad, Institution of Engineers, India.
Lau, W.S., and Venuvinod, P.K., 1980, “The Development and Utilisation of NC Machine Tools in East Asia," 9th All India Machine Tool Design and Research Conference, Kanpur, India, 
MACHINING SCIENCE AND MACHINE TOOLS
Lau, W.S., and Venuvinod, P.K., 1980, “Surface and Sub surface Work -hardening in Machining of Difficult to Machine Alloys," 9th All India Machine Tool Design and Research Conference, Kanpur, India, pp. 131-137.
Li, X., Shen, D., and Venuvinod, P.K., 2000, Hybrid Learning for Tool Wear Monitoring, Int. J. Advanced Manufacturing Technology, 16: 303-307. 
 ABOUT   DOWNLOADS     BUY     BLOG     VIDEOS     PODCAST     CONTACT

Promoting T, I & E for nation-building, firm-growth and startup success
[Valid RSS]
My title