Download PDF
Venuvinod, P. K., 2011, Introducing Venuvinod's recent trilogy titled Technology, Innovation and Entrepreneurship, Part I: My World, My Nation, Part II: My Firm, Part III: My Startup.
Patri K. Venuvinod, 2004, "Postgraduation Education," A presentation under the auspices of iodevuni.org,
Patri K. Venuvinod, 2007, Entrepreneurship as a Career, KAB Consultants Magazine, Hyderabad.
Patri K. Venuvinod, 2007, The Emerging Weightless World, KAB Consultants Magazine, Hyderabad.
Patri K. Venuvinod, and Weiyin Ma, 2004, Rapid Prototyping: Laser-based and Other Technologies, Kluwer Academic Publishers (389 pages). View sample only (from Amazon.)
Patri K. Venuvinod, 2011, Technology, Innovation and Entrepreneurship, Part I: My World, My NationeBook as well as print-on-demand editions are available from numerous book retailers and distributors including Amazon, Barnes & Nobles, Smashwords, and Lulu. Click on the Doc button for a15% sample. 
Patri K. Venuvinod, 2011, Technology, Innovation and Entrepreneurship, Part II: My FirmeBook as well as print-on-demand editions are available from numerous book retailers and distributors including Amazon, Barnes & Nobles, Smashwords, and Lulu. Click on the Doc button for a 15% sample. 
Patri K. Venuvinod, 2011, Technology, Innovation and Entrepreneurship, Part III: My StartupeBook as well as print-on-demand editions are available from numerous book retailers and distributors including Amazon, Barnes & Nobles, Smashwords, and Lulu. Click on the Doc buttonfor a 15% sample.
Venuvinod, Patri K., and Cheng, M.K., 2004, Comparative Assessment of the Force Prediction Abilities of Some Single Edge Orthogonal Cutting Models Over Diverse Data, Int. J. Machining Science and Technology, 8(1): 53-84.
Yuen, C.F., Wong, S.Y., and Venuvinod, P. K., 2002, Development of a Generic Computer-Aided Process Planning Support System, J. Material Processing Technology, 139(1): 394-401. Also presented at Int. Manufacturing Conference in China, Hong Kong, Aug. 2000, Vol. II, pp. 51-52.
Kharkevich, A.G. and Venuvinod, P. K., 2002, Extension of Basic Geometric Analysis of 3-D Chip Forms In Metal Cutting to Chips with Obstacle-induced Deformation,Int. J. of Machine Tools and Manufacture, 42: 201-213.
Venuvinod, P.K., and Sun, Hongyi, 2002, "Technological Product Innovation: An Educational Perspective from Hong Kong," 9th Asia-Pacific Conference of Engineering Management Educators (ACEME 2002), Brisbane, Australia, 7-8 October.
Djordjevich, A. and Venuvinod, Patri K., 2003, Integrating Mechatronics in Manufacturing and Related Engineering Curricula, Special Issue on Mechatronics, Int. J. Engineering Education, 19(4): 544-549.
Djordjevich, A. and Venuvinod, Patri K., 2002, "Streamlining the Controls, Electronics and Automation Subjects in Manufacturing Engineering Programs," Proc. 1st Int. Manufacturing Education Conf., University of Twente, Twente, Netherlands, April 3-5.
Patri K. Venuvinod, 2003, "Technovation and Mechatronics," Keynote Address, Technology Conference, Mahatma Gandhi Institute of Technology, Hyderabad.
Patri K. Venuvinod, 2003, "eLearning", A presentation under the ausipices of iodevuni.org,, Hyderabad, (The presentation had almost culminated in the establishment of an elLearning center in Hyderabad. SThe goal was to make Hyderabad a global hub for eLearning. Sadly, that didn't happen).
Ostafiev, V.A., and Venuvinod, P. K., 1997, A New Electromagnetic Contact Sensing Technique for Enhancing Machining Accuracy, Manufacturing Science and Technology, MED-Vol. 6-1, ASME, 113-119.
Venuvinod, P. K., 1999, "Intelligent Production Machines: Benefiting from Synergy amongst Modelling, Sensing and Learning," Intelligent Machines: Myths and Realities, Edited by Clarence de Silva, CRC Press LLC., Chapter 7, pp. 207-244.
Venuvinod, P.K., and Sun, H., 2000, Corporate Cultures in the Eras of Productivity, Quality, and Innovation: A Perspective from Hong Kong,? Asian Academy Seminar, Hyderabad, December.
Liu, Z-Q, and Venuvinod, P.K., 1999, Error Compensation in CNC Turning Solely from Dimensional Measurements of Previously Machined Parts, Annals of the CIRP, 48(Part 1): 429-432.
Z-Q. Liu, and Patri K. Venuvinod, 2001, Towards Autonomous Compilation of Turning Force Databases: Utilization of On-machine Measurement of Machined Parts, Machining Science and Technology: An International Journal, iVol. 5, No. 2, pp. 171-193.
Li, X., Venuvinod, P. K,, and Chen, M.K., 2000, Feed-Cutting Force Estimation of Motor Current Estimation with Hybrid Learning, Int. J. Advanced Manufacturing Technology, 16(12): 859-862.
Venuvinod, Patri K., 1997, Prediction Augmentation Through Reinforcing Interactions Amongst Modeling, Sensing and Learning, Working paper, Meeting of the Working Group on Modeling of Machining Operations, STC Cutting, CIRP General Assembly, Tianjin, August.
Lee, Y.H., Tummala, V.R., Yam, C.M., and Venuvinod, P.K., 1997, "Future Directions of Globalization of Hong Kong Manufacturing Industries under the Reform and Opening up of China," Int. Conference on Architecting the Global Village: Perspectives, Problems and Prospects, Hyderabad, India, January.
Venuvinod. P.K., and Ostafiev, V.A., 1997, "Successes, False Starts, and Promises in Manufacturing Engineering: Contrasting Perspectives from Hong Kong and Ukraine," 17th All India Manufacturing Technology, Design and Research Conference, Warangal, January.
P.K. Venuvinod and Hongyi Sun, 2001, "Teaching Management of Technological Innopvation to Engineers:A Regional Perspective from Hong Kong".
Wu, Paul S., Tam, H.Y., and Venuvinod, P. K., 1996, Hybrid Assembly: A Strategy For Expanding The Role of Advanced Assembly Technology, Computers in Electrical Engineering, 22(2): 109-122.
Patri K. Venuvinod, 2001, "Strategy for the Development of IODevUni (iodevuni : A Knowledge Portal)," IODevUni Meeting, Hyderabad.
K. Venuvinod Patri, V.M. Rao Tummala, and S.R.T Kumara, 2001, "International Organization for Developing Universities (iodevuni.org)", The presentation by Venuvinod to a group of senior academics in Hyderabad, which culminated in the formation of iodevuni)
BEME: Bachelor of Engineering in Manufacturing Engineering, A program offered by by the Department of Manufacturing Engineering and Engineering Management (MEEM), Presented by Patri Venuvinod in 2000. 
CIDAM: Centre for Intelligent Design, Automation & Manufacturing, City University of Hong Kong, Initiated by MEEM while Patri Venuvinod was its Head, A presentation by CIDAM Director, Prof. S.K. Tso, in 2000.
Soundar Kumara and Patri K. Venuvinod, 2000, Intelligent Systems for Manufacturing in the Internet Age, A presentation prepared for CIRP.
Patri K. Venuvinod, 2000, A presentation outlining the development of the Department of Manufacturing Engineering (MEEM), Prepared for Joint University Programmes Admissions System (JUPAS), Hong Kong. 
Peter Tse, B. Eng. (Hons) in Mechatronic Engineering in the Department of Manufacturing Engineering and Engineering Management, 2000, City University of Hong Kong,
G. Bommali and Patri K. Venuvinod, 2001, "Research into Open Architecture Systems", report.
Wong, F.S.Y., Chuah, K.B., and Venuvinod, Patri K., 2005, Automated Extraction of Dimensional Inspection Features from Part CAD Models,  Int. J. Production Research, Special Issue on Manufacturing Research in China.
Patri K. Venuvinod, 1997, "A Matter of Disciplines", and policy paper dilineating the disciplines of Industrial Engineering, Manufactring Engineering, Mechatronic Engineering, and Engineering Management
Frederick Cheng, 1997, "Force Prediction in End Milling Using Artificial Neural Nets Augmented by Acoustic Emission ," M. Eng. Thesis produced under the supervision po Patri K. Venuvinod, Department ofManufacturing Engineering and Engineering management, City University of Hong Kong.
Venuvinod, P. K., 1997, Foreword to the Proceedings of CIRP International Symposium on Advanced Design and Manufacture in the Global Manufacturing Era.
M.K. Cheng and Patri K. Venuvinod, 2001, Development of Autonomous Machining Database at the Machine Level (Part 1) - Cutting Force Data Acquisition through Motor Current Sensing, Int. Conf. Prodn Res. (ICPR-16), Prague, Czech Republic, August.
Venuvinod, P. K., 1997, Machining Research Group, A paper outlining the agenda of the group.
Venuvinod, P. K., and P. Narasimha Reddy, 2002, "Future Trends in Mechatronic Engineering".
Venuvinod, P.K., 2001,  Information Technology (IT) Project Competition: 2001 conducted by Andhra Pradesh Chapter of International Organization for Developing Universities (iodevuni).
"Economics first, always," Rasheeda Bhagat quotes Dr. Venuvinod Patri, July 3, 1998, Hindu, India.
Venuvinod, P.K., May 19 1998,  Sensor-based Modelling of Machining Operations, Proc. 1st CIRP International Workshop on Modeling of Machining Operations, Atlanta, GA, USA., 397-406.
"Eventually it will be a Hong Kong takeover of China," Rasheeda Bhagat interviews Dr. K. Venuvinod Patri, 1998, Business Line, India.
"Sentiment rare in Hong Kong, business comes first," Rasheeda Bhagat interviews Dr. K. Venuvinod Patri, JHead, Department of Manufacturing Engineering and Engineering Management, City University of Hong Kong, July 13, 1998, article in Business Line, India.
Narasimha Reddy, P., and Venuvinod, P.K., 1978, "Investigations on Cutting with Rotary Oscillating Tools--A New Cutting Process," 8th All India Machine Tool Design and Research Conference, Bombay. 
Venuvinod, P. K., 1980, Cutting Forces and Temperatures in Oblique Cutting, in Chinese, Industry Equipment, November, pp. 136-140.
Venuvinod, P. K., and Lau, W.S., 1980, "New Analysis on the Mechanics, Temperature, Tool Life and Work Hardening in Oblique Machining", in Chinese, J. South China Inst. Tech., Guangzhou, Vol. 8, No. 1, pp. 1-31. (Also presented at the Technical Conference at the 27th anniversary of South China Institute of Technology, PRC, on 17 November, 1979.)
Prasada Rao, T.H.V., Jeebala Rao, D., and Venuvinod, P.K., 1977, "A Study of Dynamic Behavior of Machine Tool Spindle Systems," Int. Conference Production Eng., New Delhi, iii-134 to iii-141
T.A. Janardhan Reddy and Dr. P.K. Venuvinod, Optimisation of Tool Setting in Machining with Type II Rotary Tools, 1978, 1.914, Annual Paper Meeting, December 20, Hyderabad, Institution of Engineers, India.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1983, The Role of Discrete Contact at the Flank Wear Land in Determining Cutting Tool Temperature in Orthogonal Cutting, Int. J. Mach. Tool Des. Res., Vol. 23, No. 4, pp. 245 261.
Venuvinod, P.K., and Lau, W.S., 1986, Estimation of Rake Temperatures in Free Oblique Cutting, Int. J. Mach. Tool Des. Res., Vol. 26, No. 1, pp. 1 14.
Rubenstein, C., Lau, W.S., and Venuvinod, P.K., 1985, Flow of Workpiece Material in the Vicinity of the Cutting Edge, Int. J. Mach. Tool Des. Res., Vol.. 25, No. 1, pp. 91 97.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1985, An Analysis of Symmetrical V Cutting, Annals CIRP, Vol. 34, No. 1, pp. 105 108.
Venuvinod, P.K., and Rubenstein, C., 1983, The Principle of Equivalent Obliquity and its Application to Rotary Cutting, Annals CIRP, Vol. 32, No. 1, pp. 53-58.
Venuvinod, P.K., Lau, W.S., and Narasimha Reddy, P., 1981, Some Investigations into Machining with Driven Rotary Tools,Trans. ASME, J. Eng. for Industry, Vol. 103, No. 4, pp. 469-477
Lau, W.S., Venuvinod, P.K., and Rubenstein, C., 1980, The Relation between Tool Geometry and the Taylor Tool Life Constant, Int. J. Mach. Tool Des. Res., Vol. 20, pp. 29-44.
Venuvinod, P.K., 1986, "Changing Patterns of Manufacturing Engineering Education Under the Impact of CIM", Hong Kong Computer Conf., Book 5, pp. XIV.3.1 - XIV.3.11, published further as "Impact of Computer Integrated Manufacture on Engineering Education,Hong Kong Computer Journal, Vol. 2, No. 6, pp. 25 35, June 1986.
Venuvinod, P.K., and Jin, W.L., 1993, Prediction of Forces in Oblique Cutting,ME Research Bulletin, City Polytechnic of Hong Kong, Vol. 1, No. 1, pp. 107-124.  
Venuvinod, P. K., 1989, On the Need for Professional Design Management,Annual Issue of the Institute of Industrial Engineers (Hong Kong), pp. 35-38.
Venuvinod, P., K., and Jin, W.L., 1996, Three Dimensional Cutting Force Analysis Based on the Lower Boundary of Shear Zone, Part I : Single Edge Oblique Cutting, Int. J. Machine Tools & Manufacture, Vol. 36, No. 3, pp. 307-323.
Venuvinod, P.K., 1993, Automated Analysis of 3D Polyhedral Assemblies: Assembly Directions and Sequences, Trans. North Am. Manufacturing Res. Inst. of SME (NAMRI/SME), May, Vol. 21, pp. 399-406. Republished in Journal of Manufacturing Systems, Vol. 12, No. 3, 1993, pp. 246-252
Chin, K.S., P., K.V., Pun, K.F., Yeung, W.H., Poon, L.T., and Poon, K.K., 1996, Starting the Journey: Team Based QI in a University Laboratory,The TQM Magazine, Vol. 8, No. 2, pp. 19-24.
Jin, W., and Venuvinod, P.K. 1995, Interaction Elimination for Multi-Component Strain-Gauge Dynamometers,Sensors and Actuators A: Physical, Elsevier, Vol. 50, pp. 1-6.
Venuvinod, P.K., and Wong, S.Y., 1995, A Graph-Based Expert System Approach to Geometric Feature Recognition,J. Intelligent Manufacturing, Vol. 6, pp. 155-162.
Venuvinod, P.K., and Yuen, C.F., 1994, Efficient Automated Geometric Feature Recognition Through Feature Coding, Annals of CIRP, Vol. 43, No. 1, pp. 413-416.
Venuvinod, P.K., and Rao, K.P., 1993, A Mechatronic Engineering Curriculum for Professional Education, Int. J. Engineering Education, Vol. 9, No. 5., 8 pages. 
Lo, H.W., Kaldor, S., and Venuvinod, P. K., 1998, A Broad-Brush Approach to the Selection of General Purpose Cutting Tool Geometry for Maximum Tool Life, Int. J. Machine Tools and Manufacture, 38(1-2): 1-14.
van Luttervelt, C.A., Childs, T.H.C., Jawahir, I.S., Klocke, F., and Venuvinod, P.K., 1998, Modeling of Machining Operations, Keynote paper, Annals of the CIRP, Part 2, 587-626. This is the report from a working group set up by CIRP to deliberate on the past, present and future of modeling of machining operations. Patri K. Venuvinos was acted as the secretary to the group.
Liu, Z-Q, Venuvinod, P. K., and Ostafiev, V.A., 1998, On-machine Measurement of Workpieces with the Cutting Tool, Int. J. Integrated Manufacturing Systems, 9(3): 168-172.
Murthy, R.L., and Venuvinod, P.K., 1972, Errors of Axial Dimensions of Workpieces held in Collets and Machined on Capstan Lathes, Machine Building Industry, India.
Venuvinod, P.K., and Djordjevich, A., 1996, Towards Active Chip Control, Annals of the CIRP, 45(1): 83-86. 
Kharkevich, A., and Venuvinod, P.K., 1999, Basic Geometric Analysis of 3D Chip Forms in Metal Cutting, Part 2: Implications,Int. J. Machine Tools and Manufacture, 39: 965-983.
Kharkevich, A., and Venuvinod, P.K., 1999, Basic Geometric Analysis of 3D Chip Forms in Metal Cutting, Part 1 : Determining up-Curl and Side-Curl Radii, Int. J. Machine Tools and Manufacture, 39: 751-769.
Sun, H. and Venuvinod, P.K., 2001, The Human Side of Holonic Manufacturing Systems, Technovation, 21(6): 353-360. Also presented at Industrial Engineering Conference, Three Gorges, China, 1999.
Yuen, C.F., and Venuvinod, P.K., 1999, Geometric Feature Recognition: Coping with the Complexity and Infinite Variety of Features,Int. J. Computer Integrated Manufacture, 12(5): 439-452.
Sun, H., Yam, R.C.M., and Venuvinod, P.K., April 1999, Education in Engineering Management, J. Engineering Education, 181-184.
Li, X., Shen, D., and Venuvinod, P.K., 2000, Hybrid Learning for Tool Wear Monitoring, Int. J. Advanced Manufacturing Technology, 16: 303-307. 
A representative set of publications and presentations by Venuvinod and his associates that is of potential interest to the tecinnovent community. The set can be organized into the five subsets shown below. To browse a specific subset, click on the icon:
Aggregate List of Publications and Presentations
Wong, F.S.Y., Chua, K.B., and Venuvinod, P.K., 2006, Automated Inspection Process Planning: Algorithmic Inspection Feature Recognition, and Inspection Case Representation, Robotics and Computer-Integrated Manufacturing, 22(1): 56-68.
Wong, W-K., Cheung, H-M, and Venuvinod, Patri K., 2005, Assessing the Growth Potential of High-Technology Start-Ups: An Exploratory Study from Hong Kong, Journal of Small Business and Entrepreneurship 18(4): 453-470.
Li, X., and Venuvinod, P.K., 2000, Wavelet Packet Transforms of Acoustic Emission Signals for Tool Wear Monitoring, Int. J. Manufacturing Science and Technology, 5(2): 171-193.
Li,X., Djordjevich. A., and Venuvinod, P.K., Predictiing Machined Errors Using Hybrid Learning, 2001, Int. J. Advanced Manufacturing Technology, 18(12): 863-872.
Venuvinod, Patri K., and Kharkevich, A., 1999, Modeling the Geometric Relationship Between 2_D and 3_D Chip Curl in Machining, 2nd CIRP Int. Workshop on Modeling Of Machining Operations, Nantes, France, January 25-26.
Venuvinod, Patri K. and Narasimha Reddy, P., 2002, Trends in Mechatronic Engineering and Education, Seminar on Mechatronic System Engineering, M.J. College of Engineering, Hyderabad, India, February 20. 
Lee, Y.H., ., and Tummala, V.M.R., Yam, R.C.M, and Patri K. Venuvinod, 1998, Future Development Directions for the Global Competitiveness of Hong Kong Manufacturing Industries, Industrial Engineering and Management Symposium (IEM98):Transformational Strategy Towards the 21st Century, 20-21 November, Hong Kong, Section B, 104-116.
Kaldor, S., and Venuvinod, P.K., 1997, Macro-level Optimization of Cutting Tool Geometry, Transactions of ASME,J. Manufacturing Science and Engineering, 119(1): 1-9.
Liu, X., Zhang, W.J., and Venuvinod, P.K., 1997, Intelligent Manufacturing Systems in Global Manufacturing Paradigm: A Critical Review and New Research Issues, CIRP Symposium on Advanced Design and Manufacture in the Global Manufacturing Era, Hong Kong, 406-416, August.
Ostafiev, V.A., and Venuvinod, P., K., 1997, Some Transferable Technology from Ukraine Industry, Asian Industrial Technology Congress, Hong Kong, 50-54.
Ostafiev, V.A., and Venuvinod, P.K., 1996, "A Comparative Analysis of Manufacturing Engineering Education in the former USSR and Hong Kong," Int. Conference Manufacturing Education, (SME), San Diego, March.
Venuvinod, Patri K., 1997, Literature Database for Modellers of Machining Operations: Progress Report, Working paper, Meeting of the Working Group on Modeling of Machining Operations, STC Cutting, CIRP General Assembly, Tianjin, August.
Venuvinod, P. K., and Jin, W.L., 1996, Three Dimensional Cutting Force Analysis Based on the Lower Boundary of Shear Zone, Part II : Two-Edged Oblique Cutting, Int. J. Machine Tools and Manufacture, 36(3): 325-338.
Armarego, E.J.A., Jawahir, I.S., Ostafiev, V.A., and Venuvinod, Patri K., 1996, Modeling of Machining Operations, Working Paper, Meeting of the Working Group on Modeling of Machining Operations, STC Cutting, CIRP, Paris, January.
Lo, H.W., Kaldor, S., and Venuvinod, P. K., 1995, Tool Life Maximization in Cutting with Two-edged Tools: The Importance of Cooling Factor," Int. Conference Manufacturing in China (IMCC), Harbin. 
Ostafiev, V.A., and Venuvinod, P. K., 1995, Controlling the Manufacturing Process, 6th Fundamental Research Conf., World Peace Institute of Technology, Seoul, 120-124.
Wu, Paul, S., Tam, H.Y., and Venuvinod, P.K., 1994, "Intelligent Assembly:Teaching and Research Strategies at the City Polytechnic of Hong Kong," Int. Symposium on Robotics and Manufacturing (ISRAM), Maui, USA, 14-18 August. 
Venuvinod, P.K., and Yam, R., 1994, "Development of the Master Degree Engineering Management Course in Hong Kong," Int. Conference on Engineering Management, Institution of Engineers, Melbourne, Australia, 10-12 April, 291-294.
Venuvinod, P.K., Chan, Lawrence W., Leung, Dennis N.K., and Rao, K.P., 1993, Development of the First Mechatronic Engineering Course in the Far East, Mechatronics, 3(5): 537-541.
Jin W.L., Zhang, Y., and Venuvinod, P.K., 1993, "On Strain Gauge Type Cutting Dynamometers," 6th Int. Manufacturing Conference with China (IMCC), Hong Kong, Vol. 2, 141-147.
Venuvinod, P.K., Jin, W.L., and Lee, C.M., 1993, "An Analysis of Forces in Oblique Cutting Based on the Lower Boundary of the Primary Deformation Zone," 6th Int. Manufacturing Conference with China (IMCC), Hong Kong, Vol. 2, 103-108.
Wong, S.Y., and Venuvinod, P.K., 1991, "Developments in Design for Assembly," 5th Int. Manufacturing Conference in China (IMCC), April.
Venuvinod, P. K., 1991, "Towards the Flexible Manufacturing of Food," 7th Int. Conference Computer Aided Production Engineering (ICAPE), Tennessee Technological University, Cookeville, March, 391-399.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1990, Tool Life in Oblique Cutting as a Function of Computed Flank Temperature, Transactions of ASME, J. Engineering for Industry, 112: 307 312.
Venuvinod, P., K., and Cheung, E.C., 1989, "New Development in Manufacturing Engineering Education at the City Polytechnic of Hong Kong," 6th Annual Conference Hong Kong Educational Research Association, Hong Kong, November 11 12.
K.U. Rao and P.K. Venuvinod, 1989, "An Investigation into the Optimum Geometry of Extra Long Series Drills," 4th Int. Metal Cutting Conference, Non Conventional Machining and Their Automation (IMCC), Beijing, C263-273.
Venuvinod, P.K., 1988, How Hong Kong Industries Can Reduce Their Assembly Costs, Science and Business Link up, May.
Venuvinod, P.K., 1987, "Computer Aided Approaches to Product Design for Ease of Assembly," Int. Conference Industrial Automation, Autotech '87, Hong Kong, October.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1987, "Analysis of Tool Life in Oblique Cutting Using Computed Values of Flank Contact Temperatures," 3rd Int. Metal Cutting Conference, Non Conventional Machining and Their Automation, Nanjing, China, Vol. I, Paper No. 1 in session on Cutting, May
Rubenstein, C., Venuvinod, P.K., and Lau, W.S., 1986, Analysis of Oblique Cutting with Controlled Contact Tools, Annals of the CIRP, 35(1): 51 54.
Leung, P.W., Mo, P.T., and Venuvinod, P.K., 1985, "Flexible Manufacturing Cell in an Educational Environment," 2nd Int. Metal Cutting Conference, Wuhan, China.
Venuvinod, P.K., and Leung, P.W., 1985, "Role of Flexible Manufacturing Cell in the Education of the Modern Manufacturing Engineer," Int. Conference Automation in Manufacturing, Singapore, session 1, 56 68.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1984, "Analysis of the Life of Controlled Contact Tools via Flank Temperature Estimation, Annals of the CIRP, 33(1): 55 60.
Venuvinod, P.K., Lau, W.S., and Rubenstein, C., 1984, "The Estimation of the Dependence of Tool Life on Rake Angle Using Computed Flank Temperatures," 5th Int. Conference Production Engineering, Tokyo, 191 196.
Venuvinod, P.K., and Lau, W.S., 1983, On the Formation of a Fluid Film at the Chip Tool Interface in Rotary Machining, Annals of the CIRP, 32(1): 59-64.
Venuvinod, P.K., 1981, "On the Formation of a Unique Type of Continuous Chip Resembling Transient Chips," 1st Int. Metal Cutting Conference (IMCC), Guangzhou, 14 17 March, pp. 177-199.
Sastry, V.V.S., Sitharama Rao, T.L., and Venuvinod, P.K., 1981, "Steady State Temperatures in Obliquely Moving Heat Sources," 6th National Heat and Mass Transfer Conference, Indian Institute of Technology, Madras, E-39 to E-43.
Venuvinod, P.K., and Reddy, P.N., 1981, "Some Studies on Cutting with Self Propelled Rotary Tools," paper no. 81-WA/Prod-16, Winter Annual Meeting of ASME, Washington, Nov. 15 20, pp. 1-11.
Lau, W.S., and Venuvinod, P.K., 1979, Some Experimental Observations on the Flank Wear of High Speed Steel Cutting Tools,Hong Kong Engineer, Hong Kong Institution of Engineers.
Venuvinod, P.K., Lau, Waishing, and Barrow, G., 1978, "On a New Model of Oblique Cutting". Trans. ASME, J. Eng. Ind., Vol. 100, pp. 287 292. Also presented as paper no. 77-WA/Prod-6 at ASME Winter Annual Meeting, Houston, 1977.
Venuvinod, P.K., and Lau, W.S., 1977, On the Estimation of Chip Flow Angle in Oblique Cutting, Microtecnic, , Switzerland, No.2, pp 32-35.
Lau, W.S., and Venuvinod, P.K., 1980, Surface and Sub surface Work -hardening in Machining of Difficult to Machine Alloys," 9th All India Machine Tool Design and Research Conference, Kanpur, India, pp. 131-137.
Venuvinod, P.K., and Narasimha Reddy, P., 1973, "Potentialities of Rotary Cutting Tools," 6th All India Machine Tool Deign and Research Conference, Bangalore.
Venuvinod, P.K., and Barrow, G., 1971, "Recent Progress in Machining with Rotary Tools," 3rd All India Mach. Tool Design and Research Conference, Roorkee.
Murty, K.L.N., Ganguly, D., and Venuvinod, P.K., 1976, "Development of Deep Hole Twist Drill," 7th All India Machine Tool Design and Research Conference, Coimbatore, 89-96.
Venuvinod, P.K., and Nayar, Vijayan E., 1975, "On the Estimation of Electric Resistance of Chip Formation Zone in Metal Cutting," Winter Annual Meeting of ASME, Houston, Paper No. 75-WA/Prod-20.
Bhaktavachalam, B., and Venuvinod, P.K., 1973, "Side Curl of Chips: Its Importance and Prediction in Metal Cutting," 6th All India Mach. Tool Design and Research Conference, Bangalore
Venuvinod, P.K., and Narasimha Reddy, P., 1977, "New Discoveries Widen the Scope of Rotary Machining," 8th All India Machine Tool Design and Research Conference, New Delhi.
Venuvinod, P.K., and Nayak, K.M., 1970, An Analysis of Machine Tool Speed Boxes with Minimum Number of Gears, J. Institution of Engineers, India, 50: 221-226.
Murthy, R.L., and Venuvinod, P.K., 1969, Centers of Rotation as an Aid to the Analysis of the Rigidity of Machine Tools," 3rd All India Machine Tool Design and Research. Conference, Bombay.
Venuvinod, P.K., and Somasundaram, S., 1967, "Oblique Cutting and Application to Rotary Cutting," 1st All India Mach. Tool Des. Res. Conf., Jadavpur, Vol. 2.
Venuvinod, P.K., and Somasundaram, S., 1966, Rotary Tools, Machine Building Industry, India.
Venuvinod, P.K., 1965, An Investigation to Explain and Evaluate the Performance of a Rotary Cutting Tool, M.Tech. dissertation, Indian Institute of Technology, Bombay.
Venuvinod, P.K., 1971, Analysis of Rotary Cutting Tools, Ph.D. thesis, University of Manchester Institute of Science and Technology.
Li X., Djordjevich, A., and Venuvinod, P. K., 2000, Current Sensor-Based Feed Cutting Force Intelligent Estimation and Tool Wear Condition Monitoring,, IEEE Transactions on Industrial Electronics, 47(3): 697-702.
Venuvinod, P. K., 1995, Recent Developments in Manufacturing Engineering Education in Hong Kong,"Manufacturing Education for the 21st Century, Vol. II (Compendium of International Models for Manufacturing Education), Society of Manufacturing Engineers, ISBN 0-87263-464-7, pp. 129-152.
Venuvinod, P.K., 2000, Revision of MEEM UG Curricula, Some thoughts.
"Cover Story: CAD/CAM in Laboraory, "Report on the interview of Dr. K.V. Patri on the occasion of the establishment of Elite .CAD/CAM Laboratory at The Department of Production and Industrial Engineering (PIE), Hong Kong Polytechnic, Electronic Bulletin, July, pp 27-29, Hong Kong Productivity Council (HKPC)
Lau, W.S., and Venuvinod,P.K.,"The Development and Utilization of NC Machines in EastAsia", 9th All India Machine Tool Design and Research Conference, Kanpur, India.
Book review by Patri, K.V., 1993, One Piece Flow by Keinichi Sekine, ProductivityPress, Cambridge, Massachusetts, 286 pages, $75.00, Interfaces, July-August, pp. 131-132 
Lau, W.S., and Venuvinod, P.K., 1980, The Development and Utilisation of NC Machine Tools in East Asia," 9th All India Machine Tool Design and Research Conference, Kanpur, India,
Deepak Patri and Patri K. Venuvinod, 2011, "Fortress Mentality in Education: The Need for Technological Windows," Presented to the Directors of a select group institutions of higher education in Hyderabad, Venue: Head office of Chatanya Bharathi Institute of Technology (CBIT), December 18. 
SELECTED PUBLICATIONS BY PATRI K. VENUVINOD AND ASSOCIATES
Kharkevich, A.G. (1999 October), Basic Geometric Analysis of 3-DChip Curl for Chip Control in Machining, PD thesis, City University of Hong Kong (Supervisor: Patri K. Venuvinod).
 ABOUT   DOWNLOADS     BUY     BLOG     VIDEOS     PODCAST     CONTACT

Promoting T, I & E for nation-building, firm-growth and startup success
[Valid RSS]
My title